Bionova MgO 10

€8.95‌

Size
For business purchases please contact us
Product information "Bionova MgO 10"

Magnesium 10%

Minerals


Food grade minerals – Concentration 1:3000 – NPK 6-0-0 + 10% MgO

Magnesium deficiency agent

Food grade mineral fertilizer 10% magnesium. Bionova MgO 10. Magnesium is essential for photosynthesis and forms the reactive nuclei in the chlorophyll. Bionova MgO 10 is mostly used when a deficiency occurs. When using Bionova's main fertilizers and stimulators, there is always the right amount of Magnesium, except when cultivating with osmoses water.

What is MgO 10?

A deficiency of magnesium manifests itself in chlorosis (slight decolourisations) between the nerves of old leaves. An excess results into an ill-growing crop and small leaves! Plants directly absorb all food grade minerals giving you optimal control of your cultivation. Magnesium in Bionova MgO 10 forms the reactive nuclei in the chlorophyll, which converts light energy into chemical energy (ATP and ADP).

Tips from Bionova growers

✔  When plants present generalized chlorosis on leaves and flowers with subsequent dried leafs,  the magnesium (Mg) is not enough to guarantee high level of chlorophyll. Consequently the photosynthesis slows down until the leaves die. The symptoms on flowers are recognizable due to the smaller size and lighter colours on them. To cure the deficiency apply Bionova MgO 10 to the cultivation, by root or leaf. To quickly recover plants from the nutritional shortage.
   To produce healthy seeds after the pollination occurs, increase the dosage of MgO 10 together with Ca 15, as both contain a correspondent amount of Nitrogen to make those more absorbable by plant.
   To prepare a personalized feeding schedule by using Bionova MgO 10 mono-nutrient you can exactly decide the amount of magnesium you are giving to your crop.
✔   Can be used for outdoor growing. After checking the soil and (irrigation) water, Bionova mono nutrients adjusts the nutrition elements to guarantee enough available nutrients

How to use Bionova MgO 10?

Bionova MgO 10 should be applied when deficiencies occur and to stabilize osmose water
Bionova MgO 10 is mixable with all Bionova fertilizers, stimulators, minerals, universals & substrates.
Bionova MgO 10 can be used as irrigation and as foliar spray.
Available in units

  • 250 ml
  • 1 liter
  • 5 liter
  • 20 liter
  • 200 liter
  • 1000 liter on request

Technical specifications

Application in irrigation
In case of deficiencies add 2.5-10 ml. per 10 liters of water.
When using Reverse Osmosis Water add 10-20ml per 10 liters of water.
A dosage of 1:1000 increases the total amount of Mg by 2 mmol. 

Application as foliar
2,5-5 ml per lite


Cultivation



Application


Recommended products

Stimulator

Bionova Ca 15

Calcium 15%

Calcium 15% Minerals Food grade minerals – Concentration 1:3000 – NPK 8-0-0 + 15% CaO Calcium defiency agent Food grade mineral fertilizer 15% calcium, Bionova Ca 15. Calcium plays an important role in stabilizing the cell walls, ion-reactions within plants, influencing growth hormones and it controls the transport of nutrients and water in your plant. In situations with a high humidity or in a compact crop the rate of conduction is small and can lead to a deficiency of calcium. Plants directly absorb all food grade minerals to provides optimal control of your plants. What is Ca15?Calcium often appears in the cell walls and membranes and plays a special role in the ion-reactions within plants. Calcium is transported in the plant by means of water conduction (xylem).In situations with a high humidity or in a compact crop the rate of conduction is small and can lead to a deficiency of calcium.A deficiency of calcium leads to softened cell walls which manifests itself immediately in an increased sensitivity to fungi. and the dying off of young leaves and growing points. Also an excess of calcium can occur. which results into brown spots on the leaves.   Tips from Bionova growers ✔  When yellow parts with brown round dots occur on the leaves it is a calcium (Ca) deficiency, apply Ca 15 to the culture. To quickly recovering plants from the nutritional shortage. ✔  Use Ca 15 weekly during fruits formation to prevent commons physio pathologies like apical rot in tomatoes, bitter pitting of apple tree, fruit cracking and dried leafs in lettuce for example. ✔  When growing in humid environments double the dosage of Ca 15 to strengthen plant tissues. ✔  Use 3 times the normal dose of Ca15 when using soft water or Reverse Osmosis Water.    ✔  Use Ca 15 to harden the sprout’s tissues on mother plants just before cutting the clones, in preparation for a healthier rooting. ✔  To produce healthy seeds after the pollination occurs increase the dosage of Ca 15 together with MgO 10, both products contain Nitrogen which leads to a sufficient uptake of nutrients. ✔  To prepare a personalized feeding schedule: use Bionova Ca 15 mono-nutrient, you can exactly decide the amount of calcium you are giving to your crop. ✔  Mono nutrients can be used for outdoor growing. After checking the soil and (irrigation) water, Bionova mono nutrients adjusts the nutrition elements to guarantee enough available nutrients   How to use Ca15? Bionova Ca 15 should be applied when deficiencies occur and/or to strengthen cell walls. Bionova Ca 15 is mixable with all Bionova fertilizers, stimulators, minerals, universals & substrates. Bionova Ca 15 can be used as irrigation and as foliar spray. Available in units 250 ml 1liter 5 liter 20 liter 200 liter 1000 liter on requesT Technical specifications Application in irrigationIn areas with soft water add to Supermixes 2-4 ml per 10 liters of water.When using Reverse Osmosis Water add 5-15ml per 10 liters of water.A dosage of 1:1000 increases the amount of Ca by 3.2 mmol.Application as foliar 2,5-5 ml per lite   See the feeding charts Cultivation Application

Stimulator

Bionova Micromix

Concentrated trace elements

Concentrated trace elements mix MineralsFood grade minerals – Concentration 1:3000 – NPK 0-0-0Micro elements fertilizer The trace elements inside Bionova Micromix are indispensable for a great number of biological processes. A deficiency of trace elements immediately manifests itself by malfunctioning of the plant’s vital functions and it manifests itself in the young leaves because trace elements cannot be transported within the plant. Also re-used soil misses a lot of trace elements, when re-using your soil upgrading the trace element proportions is mandatory. Plants directly absorb all food grade minerals in the Bionova Micromix which gives you better control of your plants. What is Micromix?Bionova Micromix is a combination of trace elements. it contains: 0.36% Fe (iron HEEDTA). 0.08% Mn (manganese EDTA). 0.4% Bo (boron monohydrate). 0.09% Zn (zinc EDTA) and 0.06% Mo (sodium molybdate). A dosage of 1:1000 Bionova Micromix. increases the total amounts by: - Fe by 100 μmol- Mn by 25 μmol- Bo by 140 μmol- Zn by 16 μmol- Mo by 5 μmol Tips from Bionova growers? ✔  If the plants present deficiencies of some other micro elements, we can apply only component Bionova Micromix to the cultivation, by root or leaf. To quickly recover plants from the nutritional shortage. ✔  Bionova Micromix contains all the necessary chelated micro-elements, which are directly absorbable and available for plants in any pH range of irrigation water.✔   Mostly micro-elements are present in outdoor fields and potting soils, but not completely available. Using MicroMix ensures exact amounts of micro-elements to maintain the physiology running at a higher level, obtaining a more consistant and bigger production. ✔  To prepare a personalized feeding schedule: use Bionova Micromix to exactly decide the amounts of micro-elements you are giving to your crop.✔    Mono nutrients can be used for outdoor growing. After checking the soil and (irrigation) water, Bionova mono nutrients adjusts the nutrition elements to guarantee enough available nutrients How to use Bionova Micromix? Bionova Micromix should be applied when deficiencies occur and in case of re-using potting soilBionova Micromix is mixable with all Bionova fertilizers. stimulators. minerals. universals & substrates. Bionova Micromix can be used as irrigation. Available in units 250 ml1 liter5 liter20 liter 200 liter1000 liter on request Technical specifications Application in irrigation In case of deficiencies add 2.5-5 ml. per 10 liters of water A dosage of 1:1000 Bionova Micromix. increases the total amounts by: See our feeding charts Cultivation Application

Universal

Bionova P 20

Phosphor 20%

Phosphor 20% Minerals Food grade minerals – Concentration 1:2500 – NPK 3-20-0 Phosphor deficiency agent Food grade mineral fertilizer 20% phosphor. Plants have high demands for phosphor in the first weeks of flowering. this gives a head start in the development of fruits/flowers. What is Bionova P 20? Bionova P 20 plays an important role in forming the energy carriers and DNA. it is indispensable for the metabolism of sugars and forming cell membrames. Plants directly absorb all food grade minerals which gives you optimal control of your plants. Bionova P 20 can also be used when having a deficiency in phosphor. A deficiency of phosphor manifests itself in a slow growth and purple decolourisation of the nerves at the lower surface of the leaf and purple stems caused by an anthocyan-accumulation. An excess of phosphor results in an ill-growing plant with an induced shortage of zinc. Before P 20. it used to be a problem to add any form of phosphor to crops that would be absorbed entirely and very fast without any harmful side-effects.Bionova P 20 is absorbed fast. and does not have any side-effects.Bionova P 20 is free of chlorides or other excess ingredients. Tips from Bionova growers ✔  If plants present symptoms of phosphorus (P) deficiencies like: short and purple-reddish petioles, short root systems with no root hairs, dark brown spots on leaves and slowed growth/flowering. Apply Bionova P20 to the cultivation, to recover plants from this nutritional shortage. ✔  Phosphorus is important to provide the necessary energy used by the plant’s metabolism to absorb and synthesize important molecules. Every single reaction inside a plant cell depends on the use of phosphorus as an energy source in the form of ATP (adenosine triphosphate).✔  To prepare a personalized feeding schedule: by using Bionova P20 mononutrient you can exactly decide the amount of phosphorus you are giving to your crop.✔  Increase the dosage of P20 one week before flowering phase, to stimulate a rapid flower induction.✔  Mono nutrients can be used for outdoor growing. After checking the soil and (irrigation) water, Bionova mono nutrients adjusts the nutrition elements to guarantee enough available nutrients. How to use P20? Bionova P 20 should be applied when deficiencies occur or to prompt the start of blooming Bionova P 20 is mixable with all Bionova fertilizers. stimulators. minerals. universals & substrates. Bionova P 20 can be used as irrigation and as foliar spray. Available in units 250 ml 1 liter 5 liter 20 liter 200 liter 1000 liter on request  Technical specifications Application in irrigationIn case of severe phosphor deficiency add a max. of 5-10 ml per 10 litres of water. To stimulate root development and/or flowering add 1-5 ml. per 10 liters of water. A dosage of 1:1000 increases the total amount of P by 3.5 mmol.Application as foliar 2,5-5 ml per lite    See the feeding charts Cultivation        Application